Homemade Guitar Clamp

13/16 inch maple blanks and 1/4 inch aluminium bar

Lay out 1 13/16 inch by 9 inch.

Drilling mortis on drill press.

Band saw jaw and lever, cut tenon with back saw. Off set hole low on the cam.

I used 3/16th tension pins to fix the lower jaw and off set to allow the top to let the top jaw slide.

Here I’m gluing on a bridge graft on the sound board. You can see why you need a deep-throat.

Gluing more bracing,you can see how regular clamps fall short.